Product Series


 

ISO 9001:2000
CONSORTIUM
MEMBER


Search for:


















 

ASA Series
Personnel Entry Clean Air Shower

Applications
 
 
• Pharmaceutical Prep
 • Semiconductor Manufacturing
 • Microelectronic Fab & Assembly


Designed to remove surface contamination from personnel entering a cleanroom. Shower is automatically actuated upon entry, releasing a bath of clean air from the side walls and ceiling. After a timed duration, the shower shuts off and allows exit. The HEPA filtered air is 99.99% efficient on .3 microns, and is re-circulated for containment. Available in two configurations: Model S (straight-thru, illustrated), and Model L (providing right angle passage).

Specifications  (see details)

Filter: Twelve inch HEPA (High Efficiency Particulate Air) type, aerosol challenged, zero probed. Minimum efficiency of 99.99% at .3 microns.

Prefilter: 1" bonded polyfiber media minimizes surface-loading. Low wall return to HEPA filter atop unit. Quick release grille.

Airflow:  Air velocity at nozzle is minimum 6000 fpm.

Construction:  Woodboard construction for minimum noise & vibration. White plastic laminate finish. Motor / blower compartments access panels, hinged. Return air plenum, painted. Door interlocks operate on magnetic system. HEPA filter mounted atop unit. Adjustable air nozzles. Anodized aluminum doors with clear acrylic windows. 0-9990 second adjustable operation pre-set to 30 seconds.

Electrical & Power Requirements:  All electrical components are UL Approved. 230V or 460V, 3 pH. Junction box on top for customer power supply. Control circuitry 12V DC & 24V AC. NEC

Motor/Blower Assembly:  High efficiency motors to reduce electrical load. Motors are thermally protected & self-lubricating. Motor / Bowers are selected to maintain constant required airflow rate up to 2x the initial static pressure. Filter/Blower housing with simple plug-in connector shipped K/D.

Lighting:  Recessed 2 pin fluorescent lighting. 80ft. candle +/- 20ft. candles.

Controls:  Shower operation controlled by solid state LCD timer, with tamperproof closure to ensure selected setting is maintained. Emergency "off" button with audible alarm installed inside shower. Built-in relays from motors, locks and timers. Sequential operation initiated by floor mat switch & door magnetic switch.
 
Options
  • Magnehelic pressure gauge
     
Other Options Available Priced On Request
  • Aluminum, stainless steel or steel painted construction
  • Automated sliding/swinging doors
  • Side-mounted blowers
  • ULPA filter – .12 micron
  • Replacement prefilters 12/case
  • Continuous HEPA purge system
  • Ionization system
  • Reverse operation switch
  • Third door
  • Photo switch operation
  • Constructed without floor
  • Knocked down construction
  • Raised floor air return
  • Programmable microprocessor control system
  • Tunnel configuration
  • White PVC lining
  • Voice instruction package
     


Contact a qualified LM Air specialist about your specific needs

CLEANROOM & LAB EQUIPMENT MANUFACTURERS

 home co. profile  |  products / services  |  catalog  |  news / links  |  contact us

 

LM Air Technology, Inc. 1467 Pinewood St. Rahway, NJ. 07065   
E-mail: E-mail:
sales@lmairtech.com      Tel: (732) 381-8200   Fax: (732) 381-4091  Toll free: (866) 381-8200