C Series Console
Horizontal laminar Flow Clean Air Workstation

Applications

Optical Assembly
Pharmaceutical Preparation
Critical Sample Preparation
Microelectronic Fabrication and Assembly
Food Processing

A free-standing console design providing an ISO 5/Class 100 atmosphere in an operator workstation environment. Completely self-contained, it functions effectively in an uncontrolled area. Clearance under the work surface allows for installation of sinks, tanks, plumbing and other special equipment. The unit is stationary, permitting electric, gas, and water hookups. Individually tested and certified to meet or exceed the specifications for Unidirectional Flow Clean-Air Devices as per Institute of Environmental Sciences and Technology IEST-RP-CC002.2.

Specifications (see details)

Filter- Three inch HEPA (High Efficiency Particulate Air) type, PSL challenged aluminum frame Mini-pleat design. Minimum efficiency of 99.99% at .3 microns.

Prefilter- 1" bonded polyfiber media minimizes surface-loading. Quick release aluminum frame. Easily accessible from front of unit. 78% arrestance - 56-57 ASHRAE.

Airflow- Average measured clean air velocity 90 fpm (+/- 10fpm). All measured values within +/- 20% uniformity.

Construction- Standard construction is Woodboard with plastic laminate exterior. Epoxy Painted Steel, 304 or 316L Stainless Steel units are also available. Rear-loaded HEPA filters. Protective plastic egg crate diffuser screen in front of HEPA filter keeps uniform air velocity within work area.

Electrical & Power Requirements- All electrical components are UL Approved. Standard 115v, 15 amp, 1 Ph, 60 Hz. SJO power cord w/ 3-prong ground plug.

Motor/Blower Assembly- High efficiency motors to reduce electrical load. Motors are thermally protected & self-lubricating. High capacity metal forward curved blowers with direct drive motors. Fan statically balanced to maintain constant airflow. Motors/Blowers are selected to maintain constant airflow rate up 2x the initial static pressure.

Lighting- Recessed 2 pin fluorescent lighting. 125 ft. candle +/- 20 ft. candles. Plastic prismatic lens cover maximizes light diffusion.

Controls- Solid state, adjustable airflow control, 80-120 fpm, 15A max. load capacity, internally mounted to prohibit accidental change. Illuminated switches on face panel for motor & lights.

Contact a qualified LM Air specialist about your specific needs

CLEANROOM & LAB EQUIPMENT MANUFACTURERS

C Series Console Horizontal laminar Flow Clean Air Workstation

Airflow- Average measured clean air velocity 90 fpm (+/- 10fpm). All measured values within +/- 20% uniformity.

Electrical & Power Requirements- All electrical components are UL Approved. Standard 115v, 15 amp, 1 Ph, 60 Hz. SJO power cord w/ 3-prong ground plug.

Controls- Solid state, adjustable airflow control, 80-120 fpm, 15A max. load capacity, internally mounted to prohibit accidental change. Illuminated switches on face panel for motor & lights.

C Series Console
Horizontal laminar Flow Clean Air Workstation