Product Series
|
ISO
9001:2000 |
R Series |
|
Applications• Semiconductor
Manufacturing |
|
 A free-standing console design providing an
ISO 5/Class 100 atmosphere in an
operator workstation environment. Completely self-contained, it functions
efficiently in an uncontrolled area. Air passes through a HEPA filter
(99.99% efficient on .3 microns) and flows continuously downward in the
work chamber ad and through perforated stainless steel work surface. The
majority of the air is re-circulate back through the filter, and the balance
flows out the front of the chamber to be replaced by fresh air. Provides
control against cross-contamination within the chamber. The unit is stationary,
allowing permanent electric, gas and water services Individually tested
and certified to meet the specifications for Laminar Flow Clean-Air Devices
as per Institute of Environmental Science IES-RP-CC-002-89. |
|
Specifications (see details)Filter - Three inch HEPA (High Efficiency Particulate Air) type, aerosol challenged, zero probed. Aluminum frame mini-pleat design, Minimum efficiency of 99.99% at .3 microns.Prefilter - 1" bonded polyfiber media minimizes surface-loading. 78 % arrestance – 56-57 ASHRAE.Airflow - Average measured clean air velocity 90 fpm (+/-10 fmp). All measured values within +/- 20% uniformity.Construction - Woodboard construction for minimum noise & vibration. White and blue plastic laminate finish. Front loading HEPA filters. Perforated stainless work surface; 1/4" on 3/8" staggered center. Supports ribs under work surface. Hinged acrylic face shield. Protective plastic egg crate diffuser screen in front of HEPA filter main uniform air velocity within the work area.Electrical & Power Requirements - All electrical components are UL Approved. Standard 115V, 15 Amp, 1 pH, 60 Hz. SJO power cord w/ 3-prong ground plug. NEC Electrical CodeMotor/Blower Assembly - High efficiency motors to reduce electrical load. Motors are thermally protected & self-lubricating. High capacity metal forward curved blowers with direct drive motors.Lighting - Recessed 2 pin fluorescent lighting. 125ft. candle +/- 20ft. candles.Controls - Solid state, adjustable airflow control, 80-120 fpm, 15A max. load capacity, Externally mounted. Illuminated switches on face panel for motor & lights. |
|
| Options: | |
|
Electrical duplex receptacle Magnehelic pressure gauge S/S lining (work chamber only) Polypro lining (w' chamber only) Electrostatic device Fixture – air, gas, or vacuum Stainless steel IV rod Ultraviolet germicidal light |
replacement prefilters, 12/case Polypro perforated work surface Clear vinyl front cover Explosion proof electrical ULPA filter – .12 micron Voltage other than 115V SS or painted steel construction |
|
|
|
|
home | co. profile | products / services | catalog | news / links | contact us |
|
LM Air Technology, Inc.
1467 Pinewood
St.
Rahway, NJ. 07065
E-mail:
sales@lmairtech.com
Tel: (732) 381-8200
Fax: (732) 381-4091
Toll free: (866) 381-8200